What is the VOX FS-252 finishing profile used for?

The FS-252 is a two-part profile for shaping the upper or end edge in the Kerrafront and Solvo systems. The inner part is fixed to the substructure, the panel is cut with the necessary expansion gap, and the outer part closes the visible detail. The profile is not a ventilation substitute for FS-262; when air needs to exit through the upper edge, the designated perforated system element is used.

What are the dimensions of the two-part FS-252 profile?

The official drawing shows a visible width of 50 mm, a depth of 47 mm, and a length of 3 m. FS-252 is supplied as a two-part set in the standard packaging. These dimensions describe the profile’s cross-section, not the allowable thickness of any arbitrary cladding. Compatibility is checked with the exact Kerrafront or Solvo panel and the current installation scheme.

How are the two parts of the VOX FS-252 installed?

First, the supporting part is leveled and fixed to the corresponding battens at the edge of the facade field. The panels fit into the profile with the specified thermal gap, without wedging. After checking the line, the decorative part is placed, which hides the fasteners and the cut. The profile is not fixed only to the panel; there must be a stable substructure behind it along the entire required length.

Which color groups and SKUs does the FS-252 finishing profile have in LATIVA?

The Shopify options are White and light colors LT-5721, Dark colors LT-5722, Wood color LT-5723, and Trend effect LT-5724. These are groups for coordination, not exact trade names of each decor. Before ordering, the specific panel and its actual color are indicated to confirm the suitable profile, foil, and production availability.

How is the quantity of FS-252 calculated for finishing a facade?

The sum of the edges that must be closed with FS-252 according to the drawing is measured and divided by 3 m. Each separate section is planned with the actual cut; two short pieces cannot always be obtained from one strip due to corners and visible joints. The reserve is determined by the number of breaks, not as a fixed percentage of the panel area.

What is the difference between VOX FS-252 and the perforated FS-262?

Both are two-part, 3 m long, and can form the upper zone, but they serve different purposes. FS-252 is a solid finishing profile with dimensions 50 x 47 mm. FS-262 is an upper ventilation profile with perforation and a smaller depth of 19 mm. When the project requires air outlet, the solid FS-252 must not interrupt the ventilation cavity.