How is the steel base of BILKA Adriatic Gloss Metal Tiles protected for a working width of 1085 mm in the Adriatic model?
BILKA Adriatic Gloss Metal Tiles are steel panels with polyester protection; for this finish, the top layer is 25 microns. The zinc coating is 225-275 g/m², and the Adriatic profile has an effective width of 1085 mm. The finish does not alter the profile geometry: the stepped profile follows a Mediterranean line and is suitable for both new and renovated pitched roofs. The 10-year warranty covers color and corrosion of the coating and applies under BILKA conditions.
What is the slope and length range for Adriatic Gloss, considering the stepped Mediterranean relief?
For Adriatic Gloss, the slope is set at 8° without diagonal joints and 14° with diagonal joints. When diagonal joints are present, the higher value applies if the profile has two values. Adriatic has a height of 42 mm and an effective width of 1085 mm; the stepped profile follows a Mediterranean line and is suitable for both new and renovated pitched roofs. The check is made on the actual geometry of the slope, including gutters, cladding, and drainage. For sheets ranging from 500 to 7000 mm, the slope and joint locations are confirmed before production.
What alignment and fastening rules apply to Adriatic Gloss, considering the stepped Mediterranean relief and 130 mm overlap?
The installation sequence for Adriatic Gloss follows the cutting plan and the rule that joints allow overlapping on both sides of the modules. The effective width of 1085 mm is maintained only with correct side joining. Installation checks consider the geometry of Adriatic: the stepped profile follows a Mediterranean line and is suitable for both new and renovated pitched roofs. The calculation starts from 8-10 self-drilling screws 4.8 x 35 mm/m² and is adjusted for edge rows and accessories.
What roofing task does BILKA Adriatic Gloss Metal Tiles perform, with an overall dimension of 1215 mm and the stepped Mediterranean relief?
As a metal tile, BILKA Adriatic Gloss Metal Tiles are used on a properly prepared pitched roof system. The Adriatic profile is characterized by its stepped profile following a Mediterranean line and is suitable for both new and renovated pitched roofs. The coating is combined with an appropriate base and system accessories. A practical choice considers the length of the water path, the number of joints, and areas around chimneys or windows.
What are the working width and the 42 mm height of the Adriatic Gloss, for the distinctive geometry of the stepped Mediterranean relief?
For the covered area of BILKA Adriatic Gloss Metal Tiles, the useful value of 1085 mm is important; the external sheet size is 1215 mm. The 130 mm zone is not counted twice as covered area. The layout follows the specific geometry of the Adriatic: the stepped profile follows a Mediterranean line and is suitable for new and renovated pitched roofs. This forms the basis for the number of sheets, while the 350 or 400 mm module determines the arrangement along the length of the slope.
How do the SKU variants differ for BILKA Adriatic Gloss Metal Tiles, for the distinctive geometry of the stepped Mediterranean relief?
For an Adriatic Gloss offer, an exact combination is selected, not just the model name. Thicknesses are 0.5 mm, 0.45 mm, or 0.4 mm, and colors include RAL 3005, RAL 3009, RAL 3011, RAL 5010, RAL 6005, RAL 7016, RAL 7024, RAL 8004, RAL 8017, RAL 9002, RAL 9005, RAL 9006, RAL 3000, or RAL 8003. For example, 0.5 mm / RAL 3005 is SKU LT-4493, and 0.4 mm / RAL 8017 is SKU LT-4481. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
