How is the working width of BILKA Dacic Wood Metal Tiles maintained during side joining, with a total dimension of 1180 mm and a relief inspired by old shingles?
BILKA Dacic Wood Metal Tile panels are aligned perpendicular to the eaves; the model can also be produced in a modular version, and installation follows precise cutting. The effective width of 1055 mm is maintained only with correct side joining. Installation checks take into account the geometry of Dacic: the profile interprets the look of old shingles and is designed for both traditional houses and new construction. The manufacturer recommends an average of 8-10 screws 4.8 x 35 mm/m²; fastening is denser at ridges, eaves, and joints.
Where is the steel Dacic Wood model with wood appearance used, for the Dacic profile with a height of 39 mm?
The purpose of BILKA Dacic Wood Metal Tiles is to form the external water-draining layer of a pitched roof. The Dacic profile is characterized by its interpretation of the look of old shingles and is designed for both traditional houses and new construction. The coating is combined with a suitable base and system accessories. The supporting structure, membrane, and drainage are designed separately and are not replaced by the metal panel.
What roofing width does the Dacic Wood panel provide with a 125 mm overlap, considering the relief inspired by old shingles and a 125 mm overlap?
The difference between the total and working width of BILKA Dacic Wood Metal Tiles is 125 mm: 1180 versus 1055 mm. The 125 mm zone is not counted twice as covered area. The cutting follows the specific geometry of Dacic: the profile interprets the look of old shingles and is designed for both traditional houses and new construction. For the Wood variant, the Black wood, Palisander golden, or Palisander anticato decors are also matched. The final calculation is made for each plane using modules of 350, 375, or 400 mm and a weight of 4-5 kg/m².
What Wood decors and thicknesses does LATIVA offer for the Dacic model, considering the relief inspired by old shingles and a 125 mm overlap?
The thickness and color form separate commercial items for BILKA Dacic Wood Metal Tiles; currently, there are 6. The thicknesses are 0.5 mm or 0.45 mm, and the colors are Black wood, Palisander golden, or Palisander anticato. For example, 0.5 mm / Black wood is SKU LT-5132, and 0.45 mm / Palisander anticato is SKU LT-5127. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
Is the Dacic Wood tile wooden or a steel product, given the relief inspired by old shingles of the Dacic model?
The name Wood in BILKA Dacic Wood Metal Tiles denotes a decorative finish, not wood material. The base is galvanized steel sheet on both sides, protected with polyester; the profile maintains a useful width of 1055 mm and a height of 39 mm. The Wood surface does not change the geometry of Dacic: the profile interprets the look of old shingles and is intended for both traditional houses and new construction. LATIVA offers Black wood, Palisander golden, or Palisander anticato. The official BILKA range states a 15-year warranty for color and corrosion on the Wood finish under the warranty terms.
Are BILKA Dacic Wood Metal Tiles suitable for a sloped roof without checking diagonal joints, given the relief inspired by old shingles and a useful width of 1055 mm?
Before cutting BILKA Dacic Wood Metal Tiles, the condition of 8° without diagonal joints and 14° with diagonal joints is checked. For diagonal joints, the higher specified value applies when the profile has two values. For Dacic, the height of 39 mm and useful width of 1055 mm are considered; the profile interprets the look of old shingles and is intended for both traditional houses and new construction. The check is done on the actual geometry of the slope, including gutters, cladding, and drainage. The standard panel length range is 500-7000 mm and is distributed across the individual slopes.
