What roofing width does the Hellenic Wood panel provide with a 115 mm overlap, considering the distinct longitudinal ribs?
One Hellenic Wood panel is 1210 mm wide in total and contributes 1095 mm to the finished row. The 115 mm zone is not counted twice as covered area. The cut follows the specific geometry of Hellenic: the distinct longitudinal ribs give a characteristic relief for traditional and modern pitched roofs. For the Wood variant, the Palisander anticato, Palisander golden, or Black wood decors are also matched. Modular lengths of 350 or 400 mm and a total height of 42 mm are added to the widths; the weight is 4-5 kg/m².
What Wood decors and thicknesses does LATIVA offer for the Hellenic model, considering the distinct longitudinal ribs?
When ordering BILKA Hellenic Wood Metal Tiles, a specific variant among the 6 listed must be fixed. Thicknesses are 0.5 mm or 0.45 mm, and colors are Palisander anticato, Palisander golden, or Black wood. For example, 0.5 mm / Palisander anticato is SKU LT-5150, and 0.45 mm / Black wood is SKU LT-5145. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
Is the Hellenic Wood tile wooden or a steel product, considering the distinct longitudinal ribs and 115 mm overlap?
Wood is the name of the Hellenic coating, while the carrier sheet is steel. The base is galvanized steel sheet on both sides, protected with polyester; the profile maintains a useful width of 1095 mm and a height of 42 mm. The Wood surface does not change the geometry of Hellenic: the distinct longitudinal ribs give a characteristic relief for traditional and modern pitched roofs. LATIVA offers Palisander anticato, Palisander golden, or Black wood. The official BILKA range states a 15-year warranty for color and corrosion on the Wood finish under the warranty conditions.
Is BILKA Hellenic Wood Metal Tiles suitable for a sloped roof without checking diagonal joints, for the Hellenic profile with a height of 42 mm?
For BILKA Hellenic Wood Metal Tiles, the minimum requirement is 8° without diagonal joints and 14° with diagonal joints. When diagonal joints are present, the higher specified value applies if the profile has two values. For Hellenic, the height of 42 mm and a useful width of 1095 mm are considered; the distinct longitudinal ribs provide a characteristic relief for traditional and modern pitched roofs. The check is done on the actual geometry of the slope, including valleys, claddings, and drainage. The possible length size is 500-7000 mm; the final value comes from the working drawing.
How is the working width of BILKA Hellenic Wood Metal Tiles maintained during side joining, considering the distinct longitudinal ribs and the 1095 mm useful width?
When laying BILKA Hellenic Wood Metal Tiles, first the right angle to the eaves is checked, then the joining allows overlapping of modules on both sides. The useful width of 1095 mm is maintained only with proper side joining. The installation check takes into account the geometry of Hellenic: the distinct longitudinal ribs provide a characteristic relief for traditional and modern pitched roofs. For the roof field, a guideline of 8-10 sealed screws 4.8 x 35 mm/m² is used, arranged according to the installation scheme.
Where is the steel model Hellenic Wood with wood appearance used, with a module of 350 or 400 mm of Hellenic?
BILKA Hellenic Wood Metal Tiles is a covering for pitched roofs made of profiled galvanized steel. The Hellenic profile is characterized by distinct longitudinal ribs that provide a characteristic relief for traditional and modern pitched roofs. The covering is combined with a suitable base and system accessories. The finish determines the type and protective layer, but applicability also depends on geometry, base, and ventilation.
