What does the central profile VOX FS-282 connect?

FS-282 is a two-part vertical profile for front connection of Kerrafront or Solvo facade panels along the entire line. It can replace individual J-caps with a suitable scheme and creates a continuous shaped seam. The official catalog also recommends it as an additional expansion joint line for walls over 10 m. The profile does not replace the support behind the panel edges.

What are the dimensions of the connecting FS-282?

The cross-section is 60 mm wide and 21 mm deep, with a standard length of 3 m. The construction consists of two parts, and the official packaging contains one set. The inner part is fixed to a doubled or sufficiently wide substructure, the panel edges enter from both sides with expansion, and the outer part closes the visible vertical joint.

When is FS-282 used as an additional expansion joint?

The catalog lists FS-282 as an option for an additional expansion joint line on walls longer than 10 m. This does not automatically mean one strip every 10 m for every project. The exact position depends on panel length, orientation, temperature range, and architectural breaks. The profile must align with a load-bearing line and maintain the specified end joints.

What color groups and codes does FS-282 have?

White and light colors are LT-5709, dark colors LT-5710, wood color LT-5711, and Trend effect LT-5712. Since the visible cap forms a continuous line, mismatched decor is very noticeable. The group in Shopify serves as an initial selection; the specific color or foil is confirmed according to the model and collection of the facade panel.

How is the two-part connecting profile FS-282 assembled?

The base of FS-282 is mounted vertically and leveled on the substructure before the panels. The edges from the left and right fields are inserted with the necessary temperature clearance and fixed on their own supports. Finally, the decorative part snaps onto the base. It should not press the panels so much as to stop their movement, nor carry unsupported edges.

When to choose FS-282 instead of separate J-201 or J-202?

FS-282 creates a full vertical connection and can work with different rows on the facade, while J-201 and J-202 are separate caps for FS-201 and FS-202 respectively. The central profile is suitable when the project seeks a continuous line or additional expansion joint. J-elements are a more local solution. The choice is made in the drawing before cutting and is not determined solely by price.