What do the 50 µm layer and 275 g/m² zinc mean for BILKA Dacic Grande Mat Metal Tiles, considering the relief inspired by old shingles in the Dacic model?
The material beneath the finish of BILKA Dacic Grande Mat Metal Tiles is steel sheet, galvanized on both sides and protected with a 50 µm polyester coating. The zinc coating is 275 g/m², and the Dacic profile has an effective width of 1055 mm. The finish does not alter the profile geometry: the profile interprets the look of old shingles and is designed for both traditional houses and new construction. The manufacturer's warranty is 30 years for color and corrosion, but this is not an unconditional guarantee for the entire structure.
When do minimum slopes of 8° and 14° apply for BILKA Dacic Grande Mat Metal Tiles, considering the relief inspired by old shingles and the 1055 mm effective width?
The Dacic Grande Mat profile is designed for an 8° slope without diagonal joints and 14° with diagonal joints, depending on the type of joints. For diagonal connections, the higher specified value applies when the profile has two values. The Dacic profile has a height of 39 mm and an effective width of 1055 mm; it interprets the look of old shingles and is intended for both traditional houses and new construction. The check is made on the actual geometry of the slope, including gutters, cladding, and drainage. Lengths from 500 to 7000 mm do not exempt the verification of the water path and necessary transverse joints.
How are BILKA Dacic Grande Mat Metal Tiles installed and how many 4.8 x 35 mm screws are required, given the overall width of 1180 mm and the relief inspired by old shingles?
For the Dacic profile, direction and overlap are not improvised: the model can also be produced in a modular version, and installation follows precise cutting. The effective width of 1055 mm is maintained only with correct side joining. The installation check considers the geometry of the Dacic profile: it interprets the look of old shingles and is designed for both traditional houses and new construction. The average guideline is 8-10 self-drilling screws with sealing 4.8 x 35 mm per m², with separate schemes for edges and joints.
Is the BILKA Dacic Grande Mat Metal Tile suitable for new and renovated pitched roofs, for the Dacic profile with a height of 39 mm?
BILKA Dacic Grande Mat Metal Tiles serve as a visible roofing cover, not as a load-bearing element. The Dacic profile is characterized by its design inspired by old shingles and is intended for both traditional houses and new constructions. The covering is combined with a suitable base and system accessories. A photo or color name alone is not sufficient to determine quantities and cutting.
How are the 1180 mm total width and 1055 mm effective width calculated for BILKA Dacic Grande Mat Metal Tiles, considering the relief inspired by old shingles and a 125 mm overlap?
The overall width of BILKA Dacic Grande Mat Metal Tiles is 1180 mm, but after side overlapping, it covers an effective width of 1055 mm. The 125 mm overlap area is not counted twice as covered surface. The cutting follows the specific geometry of the Dacic profile: the profile interprets the look of old shingles and is designed for both traditional houses and new construction. The final calculation is done for each plane using a module of 350, 375, or 400 mm and a weight of 4-5 kg/m².
Between how many thicknesses and 9 colors can you choose for BILKA Dacic Grande Mat Metal Tiles, considering the relief inspired by old shingles and a 125 mm overlap?
The exact Dacic Grande Mat item is determined by one of 9 available combinations in LATIVA. The thicknesses are 0.5 mm, and the colors are RAL 8017, RAL 8004, RAL 3005, RAL 3011, RAL 6005, RAL 7011, RAL 7024, RAL 8019, or RAL 9005. For example, 0.5 mm / RAL 8017 is SKU LT-2126, and 0.5 mm / RAL 9005 is SKU LT-0748. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
