How do the joints change the allowable slope for Dacic Mat, with the relief inspired by old shingles and a useful width of 1055 mm?
BILKA sets the slope limit for BILKA Dacic Mat Metal Tiles at 8° without diagonal joints and 14° with diagonal joints. When diagonal joints are used, the higher specified value applies if the profile has two values. For Dacic, a height of 39 mm and a useful width of 1055 mm are considered; the profile interprets the style of old shingles and is designed for both traditional houses and new construction. The check is performed on the actual geometry of the slope, including gutters, cladding, and drainage. The production length is 500-7000 mm, but gutters, bends, and openings may require sheet division.
What is the installation direction for Dacic Mat with a useful width of 1055 mm, an overall dimension of 1180 mm, and relief inspired by old shingles?
The BILKA guide requires the BILKA Dacic Mat Metal Tiles panel to be perpendicular to the eaves; the model can also be produced in a modular version, and laying must follow the exact cut. The useful width of 1055 mm is maintained only with proper side joining. The installation check considers the geometry of Dacic: the profile interprets the style of old shingles and is designed for both traditional houses and new construction. For the main field, BILKA specifies an average of 8-10 fasteners 4.8 x 35 mm per square meter; the quantity is refined according to details.
What practical application does the Dacic profile with a matte surface have, for the Dacic profile with a height of 39 mm?
For BILKA Dacic Mat Metal Tiles, the metal sheet is profiled as a tile module to channel water along the slope. The Dacic profile is characterized by interpreting the style of old shingles and is designed for both traditional houses and new construction. The coating is combined with a suitable base and system accessories. The covering is paired with membrane, fasteners, ridge, gutters, front and wall flashings according to the project.
Why is the BILKA Dacic Mat Metal Tile calculated with 1055 mm, and not with the full dimension, according to the relief inspired by old shingles and 125 mm overlap?
For quantity calculation of BILKA Dacic Mat Metal Tiles, an effective width of 1055 mm is used, not the full 1180 mm. The 125 mm zone is not counted twice as covered area. The cutting follows the specific geometry of Dacic: the profile interprets the style of old shingles and is designed for both traditional houses and new construction. This forms the basis for the number of sheets, while the 350, 375, or 400 mm module determines the arrangement along the slope length.
Which thicknesses 0.5 mm, 0.6 mm, or 0.45 mm are listed for Dacic Mat, according to the relief inspired by old shingles and 125 mm overlap?
In the LATIVA catalog, BILKA Dacic Mat Metal Tiles are not a single SKU but a group of 24 variants. Thicknesses are 0.5 mm, 0.6 mm, or 0.45 mm, and colors include RAL 8017, RAL 8004, RAL 3005, RAL 3009, RAL 6020, RAL 7016, RAL 7024, RAL 8019, RAL 9005, or RAL 6005. For example, 0.5 mm / RAL 8017 is SKU LT-4413, and 0.45 mm / RAL 9005 is SKU LT-3925. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
What protection and warranty period does the matte finish of Dacic have, considering the relief inspired by old shingles on the Dacic model?
For BILKA Dacic Mat Metal Tiles, the matte finish uses a 35 µm polyester surface layer. The zinc coating is 225-275 g/m², and the Dacic profile has an effective width of 1055 mm. The finish does not alter the model geometry: the profile interprets the style of old shingles and is designed for both traditional houses and new construction. The 15-year period applies to color and corrosion of the coating and is valid under BILKA conditions.
