How is the working width of BILKA Iberic Wood Metal Tiles maintained during side joining, considering the high ornamental profile of the Iberic model?
BILKA Iberic Wood Metal Tile panels are aligned perpendicular to the eaves; the double-sided overlap allows installation to start from either the left or right. The useful width of 1080 mm is maintained only with proper side joining. Installation checks take into account the geometry of Iberic: the high profile creates a pronounced relief on the pitched roof. The manufacturer recommends an average of 8-10 screws 4.8 x 35 mm/m²; fastening is denser at ridges, eaves, and joints.
Where is the steel Iberic Wood model with wood appearance used, considering the high ornamental profile?
The main use of BILKA Iberic Wood Metal Tiles is for new construction or renovation of pitched roofs. The Iberic profile is characterized by a high profile that creates a pronounced relief on the pitched roof. The covering is combined with a suitable base and system accessories. Before selection, the slope, actual dimensions along the slopes, gutters, ridges, and penetrations are checked.
What roofing width does the Iberic Wood panel provide with a 100 mm overlap, for a working width of 1080 mm in Iberic?
At an eave length of about 10 m, approximately 10 positions along the useful width are needed for BILKA Iberic Wood Metal Tiles, before edge adjustments. The 100 mm zone is not counted twice as covered area. Cutting follows the specific geometry of Iberic: the high profile creates a pronounced relief on the pitched roof. For the Wood variant, the Palisander anticato, Palisander golden, or Black wood decors are also checked. The final calculation is done for each plane, using a module of 350 or 400 mm and a weight of 4-5 kg/m².
What Wood decors and thicknesses does LATIVA offer for the Iberic model, for a working width of 1080 mm in Iberic?
The price and SKU for BILKA Iberic Wood Metal Tiles are linked to the selected variant, not just the general title. Thicknesses are 0.5 mm or 0.45 mm, and colors are Palisander anticato, Palisander golden, or Black wood. For example, 0.5 mm / Palisander anticato is SKU LT-5144, and 0.45 mm / Black wood is SKU LT-5139. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
Is the Iberic Wood tile wooden or a steel product, with a module of 350 or 400 mm for Iberic?
In the Iberic Wood variant, the word Wood describes the color effect, not the panel composition. The base is galvanized steel sheet on both sides, protected with polyester; the profile maintains a useful width of 1080 mm and a height of 47 mm. The Wood surface does not change the geometry of Iberic: the high profile creates a strongly pronounced relief on the pitched roof. LATIVA offers Palisander anticato, Palisander golden, or Black wood. The official BILKA range states a 15-year warranty for color and corrosion on the Wood finish under the warranty conditions.
Are BILKA Iberic Wood Metal Tiles suitable for a low-pitched roof without checking diagonal joints, considering the high ornamental profile and 100 mm overlap?
Before cutting BILKA Iberic Wood Metal Tiles, the condition of 8° without diagonal joints and 14° with diagonal joints is checked. For diagonal joints, the higher specified value applies when the profile has two values. For Iberic, a height of 47 mm and a useful width of 1080 mm are considered; the high profile creates a strongly pronounced relief on the pitched roof. The check is done on the actual geometry of the slope, including gutters, cladding, and drainage. The standard panel length range is 500-7000 mm and is distributed across the individual slopes.
