Is the Romanic Wood tile wooden or a steel product, considering the 30-millimeter step and the Roman line?
The name Wood in BILKA Romanic Wood Metal Tiles denotes a decorative finish, not wood material. The base is galvanized steel sheet coated on both sides, protected with polyester; the profile maintains a useful width of 1020 mm and a height of 62 mm. The Wood surface does not change the geometry of Romanic: the 30-millimeter profile step and the total height of 62 mm create a clearly defined Roman line. LATIVA offers Palisander golden, Palisander anticato, or Black wood. The official BILKA range specifies a 15-year warranty for color and corrosion on the Wood finish under the warranty terms.
Are BILKA Romanic Wood Metal Tiles suitable for a low-slope roof without checking diagonal joints, at a Romanic module of 350 or 400 mm?
BILKA sets the slope limit for BILKA Romanic Wood Metal Tiles at 8° without diagonal joints and 14° with diagonal joints. The higher value applies when the profile has two values. For Romanic, the height is 62 mm and the useful width is 1020 mm; the 30-millimeter profile step and total height of 62 mm create a clearly defined Roman line. The check is made on the actual geometry of the slope, including gutters, flashings, and drainage. The production length is 500-7000 mm, but gutters, bends, and openings may require sheet division.
How is the working width of BILKA Romanic Wood Metal Tiles preserved in side joining, for the Romanic profile with a height of 62 mm?
The BILKA guide requires the BILKA Romanic Wood Metal Tiles panel to be perpendicular to the eaves; double-sided joining allows laying from left or right. The useful width of 1020 mm is preserved only with correct side joining. The installation check considers the geometry of Romanic: the 30-millimeter profile step and total height of 62 mm create a clearly defined Roman line. For the main field, BILKA specifies an average of 8-10 fasteners 4.8 x 35 mm per square meter; the quantity is refined according to details.
Where is the steel Romanic Wood model with wood appearance, for a working width of 1020 mm, used in Romanic?
In BILKA Romanic Wood Metal Tiles, the metal sheet is profiled as a tile module to channel water along the slope. The Romanic profile is characterized by a 30-millimeter profile pitch and a total height of 62 mm, creating a clearly defined Romanesque line. The coating is combined with a suitable base and system accessories. A membrane, fasteners, ridge, gutters, edge, and wall flashings are selected according to the project.
What roofing width does the Romanic Wood panel provide with a 120 mm overlap, given a total dimension of 1140 mm and a 30-millimeter pitch with the Romanesque line?
For quantity calculation of BILKA Romanic Wood Metal Tiles, an effective width of 1020 mm is used, not the full 1140 mm. The 120 mm overlap area is not counted twice as covered area. The cutting follows the specific geometry of Romanic: the 30-millimeter profile pitch and total height of 62 mm create a clearly defined Romanesque line. For the Wood variant, the Palisander golden, Palisander anticato, or Black wood decors are also matched. This forms the basis for the number of sheets, while the 350 or 400 mm module determines the arrangement along the slope length.
What Wood decors and thicknesses does LATIVA offer for the Romanic model, with a total dimension of 1140 mm and a 30-millimeter pitch and Romanesque line?
In the LATIVA catalog, BILKA Romanic Wood Metal Tiles are not a single SKU but a group of 3 variants. The thicknesses are 0.5 mm, and the colors are Palisander golden, Palisander anticato, or Black wood. For example, 0.5 mm / Palisander golden is SKU LT-5120, and 0.5 mm / Black wood is SKU LT-5118. It is not assumed that every thickness combines with every color; the actual position in the selector is valid.
