Which thicknesses, coatings, and colors are actually recorded for BILKA Berna Gloss Metal Fence Profiles in a project for a section near a garage entrance and maneuvering area?

BILKA Berna Gloss Metal Fence Profiles have 35 commercial variants with separate SKUs. The thicknesses are 0.4 mm, 0.45 mm, or 0.5 mm; the coating is either single-sided painted or double-sided painted; the colors are RAL 7016, RAL 7024, RAL 8017, RAL 3005, RAL 3011, RAL 9005, RAL 3000, RAL 3009, RAL 6005, RAL 5010, RAL 8003, RAL 8004, RAL 9002, or RAL 9006. For example, 0.4 mm / single-sided painted / RAL 7016 is SKU LT-4665, and 0.5 mm / single-sided painted / RAL 9006 is SKU LT-4697. The exact SKU for a section near a garage entrance and maneuvering area prevents mixing thicknesses and surfaces.

How is the metal protected in BILKA Berna Gloss Metal Fence Profiles, and what does the coating lifespan depend on in a project for a row around a garden with frequent interruptions?

The steel base of BILKA Berna Gloss Metal Fence Profiles is galvanized on both sides and protected with polyester. For the available categories, the official table distinguishes: single-sided painted gloss - 10 years; double-sided painted 0.4 mm - 5 years. The lifespan refers to color and corrosion and applies under the conditions in BILKA's warranty documents; it is not an unconditional guarantee for the entire fence. In a project for a row around a garden with frequent interruptions, the visible sides determine whether a single-sided or double-sided painted variant is needed.

What lengths, finishes, and mounting directions can be planned for BILKA Berna Gloss Metal Fence Profiles in a project for a fence around a terraced yard with several levels?

BILKA produces the Berna series in lengths from 0.8 to 2.5 m. In the current Shopify selector, thickness, type of coating, and color are recorded, but there is no separate option for length or end shape. These parameters, the substructure, and fasteners are confirmed by LATIVA before ordering. For a project with a fence around a terraced yard with several levels, the working drawing must fix the direction, length, end, and gap.

Can a photo on a monitor definitively determine the color of BILKA Berna Gloss Metal Fence Profiles for a project involving an entrance area with a sign, lighting, and separate openings?

The low maintenance of BILKA Berna Gloss Metal Fence Profiles comes from the protected steel base. It is reasonable to check for dirt, mechanical damage, and fasteners without inventing an interval not specified by the manufacturer. BILKA warns that colors may appear differently on various screens; if in doubt, a physical color chart is used. For a project involving an entrance area with a sign, lighting, and separate openings, a physical color sample is more reliable than a monitor image.

Does BILKA Berna Gloss Metal Fence Profiles represent a complete fence or just a profile from the Berna series in a project for horizontal slats on stepped sections on a slope?

The BILKA Berna Gloss Metal Fence Profiles model represents a profiled steel slat, not a complete fence system. BILKA specifies for Berna a width of 105 mm and a relief height of 9.2 mm; the material is double-sided galvanized sheet metal with polyester protection. These dimensions identify the profile but do not replace the sizing of posts, crossbeams, fasteners, and joints. In a project for horizontal slats on stepped sections on a slope, the slat fills the opening, and the supporting scheme is checked separately.

What dimensions should be used when cutting a fence with BILKA Berna Gloss Metal Fence Profiles for a project involving a low fence on a solid concrete plinth?

The face dimension of BILKA Berna Gloss Metal Fence Profiles is 105 mm; the project adds the free space to this. The number is determined by the length of the panel divided by the sum of the profile width and the chosen clear gap, then the end distances are checked. The production lengths for the series are 0.8–2.5 m. In a project for a low fence on a solid concrete plinth, each clear section is measured individually before rounding the number.