What are the main features of the ASKO graphite eaves cladding?
The graphite product is a PVC three-board panel measuring 3 m in length and 305 mm in width, designed for the lower finishing of eaves. It is available in both perforated and non-perforated versions. ASKO specifies UV resistance and low maintenance requirements for the system. The panel is installed with the appropriate profiles on a prepared frame and is not used as an external roofing covering.
Is the graphite of the ASKO panel equal to RAL 7016?
It cannot be automatically assumed. The product is listed only with the color name "Graphite," without a confirmed RAL code in Shopify or on the official ASKO page used. It may visually be close to anthracite elements, but the accuracy of the match should be checked with a physical sample against the gutter, sheet metal, or window frame that will be combined.
Which SKU is the perforated ASKO graphite cladding?
The perforated graphite panel is LT-4346, and the solid version is LT-4345. Perforation is chosen for sections where the project requires air intake into the roof cavity. The solid SKU covers the remaining visible area. When accepting delivery, check not only the color but also the perforation of each package, as both variants belong to the same product page.
How many graphite panels are needed for a 12 × 0.60 m eaves strip?
The area of the strip is 7.2 m², and the nominal area of a 3 × 0.305 m panel is 0.915 m², so the geometric minimum is 8 panels. The actual number depends on the direction of the three-board profile and how the 3-meter lengths are cut to the 0.60 m width. Waste, perforated sections, and non-interchangeable end pieces are added.
Should the entire graphite eaves be perforated?
Not necessarily. ASKO offers both types because the perforated panels provide air openings, while the solid ones form the remaining surface. The ratio is not determined by color and should not be chosen by a universal rule without dimensions. The required free ventilation area is calculated, the continuous air channel is checked, and then the perforated panels are placed along the eaves.
Are there graphite J- and H-profiles for this ASKO panel?
Yes, in LATIVA both the J-finishing and H-connecting ASKO profiles have a "Graphite" variant. The J-profile shapes the peripheral edges, while the H-profile accepts panels from two adjoining fields. The profiles are separate products and are not automatically included with the panel. For a matching shade, check samples or batches, especially when panels and trims are delivered at different times.
