Is the brown ASKO cladding solid color or does it imitate wood?
The brown ASKO panel is listed among the solid color options, not as a wood decor. It provides an even brown tone across the three-board PVC profile. If a pronounced wood grain is desired, the same system offers separate products like Walnut, Golden Oak, and Winchester. The difference should be checked with actual samples, as photos do not reliably show texture and gloss.
What is the size of one brown ASKO eaves panel?
The brown panel is 3000 mm long and 305 mm wide. This gives a nominal face area of 0.915 m² before accounting for locking edges and cutting. The three-board relief divides the visible width into three sections, but the product is ordered as a whole panel. Quantities are planned according to specific fields to use the three-meter lengths efficiently.
What SKU codes are there for the brown ASKO panel with and without perforation?
The non-perforated brown version is LT-4347, and the perforated one is LT-4348. The solid panel forms a continuous decorative surface; the perforated one adds air vents in planned locations. Both SKUs have the same basic dimensions and color but should not be mixed without a quantity plan. When ordering, specify the quantity of each type separately to fulfill the ventilation scheme.
How does ASKO Brown differ from the Mahogany and Mahogany Teak colors?
"Brown," "Mahogany," and "Mahogany Teak" are three separate product colors with their own images and SKUs, not different names for one variant. Brown is classified as solid color; the other names denote separate decorative solutions. Do not combine a profile of one color with a panel of another based only on approximate photos. Size compatibility does not guarantee visual match.
How are the solid and perforated brown panels distributed under the eaves?
The distribution starts from the required air intake for the specific roof structure. Perforated panels are placed in the designated ventilation sections, and solid panels fill the remaining area so the pattern remains consistent. The presence of holes alone is not enough: there must be a free air path above them to the outlet. The final scheme is set before cutting.
What brown profiles are needed to complete the ASKO system?
Brown J-profile and brown H-profile, each 3 m long, can be chosen for the brown panels. The J-profile accepts the panel edge around the perimeter, and the H-profile joins two fields. Besides these, a properly executed supporting base and design solution for corners are needed. Profiles are counted by linear meters, so their number does not equal the number of panels.
