What kind of product is the ASKO eaves panel in Mahogany color?
ASKO Mahogany is a PVC panel with a decorative surface in a color labeled by the store as Mahogany. It is not made from mahogany wood. The profile is three-board and serves as the lower cladding of the roof eaves. The product is available in both solid and perforated versions, allowing for both closed and ventilated sections within the same visual range.
What size does one ASKO Mahogany panel cover?
The nominal size is 3000 × 305 mm, which corresponds to 0.915 m² of geometric face area. This is not the final usable coverage because system connections and cutting along the eaves cause losses. The long three-meter format can be cut crosswise or lengthwise only according to the installation scheme; leftovers are included in the calculation only after checking if they are usable.
How can the perforated and solid ASKO Mahogany variants be recognized by SKU?
The perforated Mahogany panel is LT-4350, and the solid one is LT-4349. The perforation must remain open towards the working air channel; the solid version does not have the same ventilation function. When assembling the project, record both codes separately because the common color name does not indicate the type. Also check the face decor to avoid mixing different mahogany variants.
Are ASKO Mahogany and ASKO Mahogany Teak the same?
No, these are two separate products with different images and SKUs. Mahogany uses LT-4349/LT-4350, while Mahogany Teak is LT-4351/LT-4352. Both are PVC panels with the same basic format, but the similar names do not guarantee the same shade or pattern. If they are to be combined on one facade or eaves, real samples should be compared under the same lighting first.
How many Mahogany panels are needed at minimum for an eaves area of 6 × 0.8 m?
The area is 4.8 m², and nominally one panel covers 0.915 m², so the geometric minimum is 6 pieces. The actual cutting may require more because the width of 0.8 m does not necessarily divide optimally by the three-meter length and the visible three-board module. Solid and perforated panels are allocated separately before adding the reserve.
What profiles should I order with the ASKO Mahogany panels?
For the edges, use the Mahogany J-profile, and for joining two fields, the Mahogany H-profile. Both accessories are separate products with a length of 3 m. Besides these, the project may require a supporting frame and specific corner solutions, which are not part of the panel itself. Measure the peripheral and connecting lines separately to get the correct quantities.
